制氮機如何正確保養才能延長使用壽命

正確的制氮機保養知識是非常必要的，良好的操作習慣和定期的保養維護，能延長設備正常使用壽命，減少能耗，降低維修成本，更能有效避免突發性故障，大幅降低故障對生產帶來的負面影響。下面清越帶你一起了解制氮機保養的正確知識和方法。

The correct maintenance knowledge of nitrogen generator is very necessary. Good operating habits and regular maintenance can prolong the normal service life of the equipment, reduce energy consumption, reduce maintenance costs, and effectively avoid sudden failures and greatly reduce the negative impact of failures on production. The following Qingyue will take you to understand the correct knowledge and methods of nitrogen machine maintenance.

1、對空氣處理環節的檢測，冷干機的制冷效果怎么樣，對管道濾芯定期更換（每六個月更換一次），使空氣質量更好。

1. For the detection of air treatment links, how about the refrigeration effect of the cold dryer, and replace the pipe filter element regularly (every six months), so as to improve the air quality.

2、對制氮機活性炭進行更換（12個月更換一次），活性炭環節是除油的一個過程，能是空氣中的油分降低，避免對制氮機碳分子篩污染中毒。

2. The activated carbon of nitrogen generator is replaced once every 12 months. The activated carbon link is a process of oil removal, which can reduce the oil content in the air and avoid the pollution and poisoning of carbon molecular sieve of nitrogen generator.

3、對制氮機氮?dú)夥治鰞x檢測校準，p860系列氮?dú)夥治鰞x一般壽命為2-3年，壽命到期建議更換，避免對制氮機純度的誤判及對產品造成損失。

3. For the detection and calibration of nitrogen analyzer of nitrogen generator, the general service life of P860 series nitrogen analyzer is 2-3 years. It is recommended to replace it when the service life is expired, so as to avoid misjudgment of purity of nitrogen generator and loss of products.

山東制氮機

Shandong nitrogen generator

4、對電磁閥和氣動閥進行檢查，為確保設備正常運行，建議用戶有備用。

4. Check the solenoid valve and pneumatic valve. In order to ensure the normal operation of the equipment, users are advised to have spare parts.

5、制氮機碳分子篩（5-6年更換一次）氮產率進行分析試驗，確保氮產率滿足客戶的需求。進行保養時要根據客戶的使用情況，對制氮機碳分子篩進行添加或更換。

5. Analyze and test the nitrogen yield of carbon molecular sieve (replaced every 5-6 years) to ensure that the nitrogen yield meets the needs of customers. During maintenance, the carbon molecular sieve of nitrogen generator should be added or replaced according to the use of customers.

保養的目的在于防止故障而非排除故障，保養遠遠低于維修成本，保養能避免不規則的故障，避免發生故障時對生產的影響，保養能保證能耗效率，保養能延長設備的正常使用壽命， 其綜合效益是為廣大用戶大大降低其生產成本。

The purpose of maintenance is to prevent faults rather than eliminate them. Maintenance is far lower than the maintenance cost. Maintenance can avoid irregular faults and avoid the impact on production when faults occur. Maintenance can ensure energy consumption efficiency, and can extend the normal service life of equipment. Its comprehensive benefit is to greatly reduce the production cost for the majority of users.

相關標簽：山東制氮機